Avan paint protection, Gold Coast

Avan Ceramic Coating on the Gold Coast

Certified Fireball ceramic coating, matched to the surface and applied in our Ashmore workshop by a team with 25+ years on paint.

Rated 5.0 on GoogleCertified Fireball InstallerPrice in WritingAfterpay Available

By submitting you consent to being contacted about your enquiry.

What Avan owners should know

More than 30 years of Australian RVs, from the Aliner to the Ovation. Keep yours looking the way it did on delivery day.

Avan has been building RVs in Australia for more than 30 years, starting with the fold-up Aliner camper and growing into Aspire caravans and Ovation and Applause motorhomes. Whichever one you own, it'll spend most of its life parked outside in Queensland sun, which is why the best time to protect it is while the finish is still new. Book a time, bring it in to our Ashmore workshop, and we'll take it from there.

We protect every kind of Avan:

A body that can't be cut back

Avan's composite and painted aluminium cladding can't be cut back to fresh gloss the way a fibreglass van can. Whatever the sun does to the finish tends to stay done, so the value of a coating is in protecting a new or near-new surface before Queensland UV gets to work on it.

Two finishes on one motorhome

An Ovation motorhome is really two vehicles: a Fiat Ducato cab in automotive paint, and a composite-clad body behind it. The cab can be machine polished back to gloss like any car. The body gets cleaned and decontaminated only. We treat each part the way it needs before anything is coated.

Black streaks and road grime

Runoff from the roof leaves black streaks down the walls under windows, awnings and vents, and road film builds up on the front and lower panels after every trip. On a coated van it comes off with a soft wash instead of a scrubbing brush.

Checkerplate that collects grime

Aspire caravans wear black checkerplate along the lower sides, and every raised diamond is a ledge for dust and road film. A coated surface lets that grime go with a rinse instead of a stiff brush.

What Avan paint is really like

Most Avans aren't skinned in fibreglass. Ovation motorhomes are built with composite aluminium cladding, and Aspire caravans use a one-piece sandwich panel with painted aluminium on the outside and black checkerplate skirts. Composite and painted aluminium cladding gets no machine work, so the body gets a careful wash and decontamination, then the coating goes on to protect the finish you have. On an Ovation motorhome, the Fiat Ducato cab is automotive paint and can be machine polished like any car.

Models we protect

Including, but not limited to:

Ovation C ClassOvation B ClassApplauseAspire HardtopAspire Pop TopAvan HardtopInfinity Slide-OutRay Pop TopAlinerCruiselinerSportlinerCruiserAdventurePlus

Our answer: we prep your Avan for what its paint actually needs, then lock it in with Fireball.

How the job runs

How We Prep Your Avan Before It’s Coated

Preparation is the job. The coating is the last hour of it.

  1. 01Full inspection under LED and swirl-finder lighting, with paint depth readings recorded panel by panel.
  2. 02Two-bucket hand wash, wheels and arches degreased, badges and shuts cleaned out.
  3. 03Chemical iron and industrial fallout removal, then a clay treatment to lift bonded contamination.
  4. 04Tape-up of trim, rubbers and sensitive edges before any machine work.
  5. 05A careful wash and full decontamination of the walls, roof and checkerplate. Avan's composite and painted aluminium cladding gets no machine work. On an Ovation, the Fiat Ducato cab is automotive paint and is machine polished where it needs it.
  6. 06Extra time on the front, the lower panels and the checkerplate, with decals, seals and badges worked around by hand.
  7. 07Panel wipe with a coating-safe solvent to strip polishing oils and reveal the true finish.
  8. 08Fireball ceramic coating applied by hand, levelled panel by panel under controlled lighting.
  9. 09IR / controlled cure, then a final inspection and handover pack with aftercare instructions.
Gold Coast Polishing team working on a camper trailer on site
Rinsing a camper trailer before decontamination
Hand-finishing the side wall of a caravan

Fireball Professional Systems

Why Avan Owners Choose Gold Coast Polishing

The Fireball ceramic coating range

How It Works

1

Enquire

Send the details and a few photos, and get your price in writing.

2

Lock in a date

We’ll confirm the day that suits you.

3

Bring it to Ashmore

We do the work under cover in our workshop and hand over your aftercare guide.

2/1 United Road, Ashmore, Gold Coast

Customers come from Byron Bay to Brisbane.

What Our Customers Say

Rated 5.0 on Google

Questions Avan Owners Ask

Can’t see yours? Call or text and you’ll get a straight answer.

What does it cost to coat an Avan?

Every Avan is different in size, surface and condition, so we price it from the details and photos you send. You get the price in writing before anything is booked.

What warranty do I get?

Fireball Silla+ with a 5-year warranty or Butterfly+ with up to 7 years, matched to your van at inspection.

Can you come to me?

No. All work is done at our Ashmore workshop, under cover with proper lighting, water and power. That’s a big part of why the finish lasts.

How long will it be with you?

It depends on the size and condition. You’ll get a timeframe with your quote.

Do you take Afterpay?

Yes.

Where are you?

2/1 United Road, Ashmore, on the Gold Coast.

Enquiry

Get Your Avan Price Today

Tell us the make, model and size, and send a few photos if you can. We’ll come back with a price in writing.

Reach us through

By submitting you consent to being contacted about your enquiry.